Cargo Lift Elevator
Choose a Suitable Cargo Lift Elevator
Choose a Suitable Cargo Lift Elevator
Do you know how to design a suitable porch lift elevator for your home?
Firstly, measure the local site where the lift will installed. Measure the total lifting height of the lift, and the space size for install the lift elevator.
Secondly, tell us the local electric voltage, we need customized the motor for the lift.
Then your lift can be produced, and we send you the porch lift assemble video.
After receive the lift, assemble the lift and installed it in your site.
Like it? Contact us!
Sometimes the scissor lift platform can’t raising as well. Maybe some function is locked or opened. Following way can help you solve the problem. 1. There’s a safety lock on the two control panels. If any of this lock pressed, the system will locked. And the platform can’t up or down. You need rotate right this lock, then check if the lift can be working.
2. When you press UP button, the motor running but the platform can’t raised, maybe manual down valve is opened, you need close it and try again.
Manual down valve location as following photo:
Contact us if you still have any questions on the scissor lift platform.
This morning, Easy Lifting Team 10 units scissor lift elevator finished final testing and load into the container. Customer use the lift to transport seeds from first floor to second floor.
The lift elevator size 1.8×1.6 meters. Total travel height 3000mm. All these lifts painted by powder coating, with good rust-proff performance.
And installed much more easier than a elevator.
Lifts container will arrive Bangladesh after 35 days.
We will always provide all kinds of customized lift platforms to the clients all the world, contact us if you need a scissor lift table.
Recently, SKYLIFT Team bulid a new workshop for new lifts production line. In the following time, mostly lifts will produced in new workshop.
On December 15th,2015, we just finished the order for 4 man lifts, model SJL-8.
This model lifting height 8m, load capacity 125kg.
With very easy control methods: just have three control buttons UP DOWN STOP,can be controlled both on ground and top platform.
Next order will be 10 units. Come on…
The new product wheelchair lift has send to Russian Federation on 24/9/2014.
This 1.1m wheelchair lift, is used in a stage with four wheels it is widely used both in China and in foreign country.
The wheelchair lift consists of a platform with high side walls, an upper landing gate, a platform mounted gate,
a drive system and easy-to-use operating controls. Suitable for indoor and outdoor use.
1, Light weight, good flexibility, suitable for single operation;
2.The special 2 mast guide wheel device lift smoothly;
3, Compact structure, small size in transporting, can be hold in the general elevator carand can smoothly through the doorways and narrow channels;
4,Leg structure with double protection,more secure, and close to the working facelifting operation;
5, According to the demands to cnotrol the lifting height, it can be made into a manual on or electricon lifting platform. In order to meet the lifting platform can not enter the door is relatively low situation.
Even if you are familiar with the other types of aerial work platform, but to ensure the safe and efficient work, please read the following precautions:
1.Without the basic operation training person should not use the machine.
2.Without the required conditions of using it shouldnot be forced to work.
3.The mast and platform should not be any obstacles or collision in the process of lifting and hoisting.
4.Exceept the emergency, the ground staff should not operation control device before the high-altitude operations personnel command.
5.Platform lifting, forbid to stand or stowage items.
6.No change, modify and waste safety device.
7.Forbidden overload hoisting.
8.Forbidden mobile machine.
9.Forbidden set up the working height increasing device.
The so-called wheelchair lift platform, is mainly composed of a track and a lifting bedplate, that is similar to a simple small elevator. The rail is embedded in the channel entranceon the wall that with the slope of the stairs down the rail is to the internal. The lifting platform can be folded against the wall when it is not in used, hence it can not occupy the channel entrance space. Rides wheelchair’s disabled when in use, the wheelchair on four wheels can be fixed on the bedplate, press the switch can control the lifting platform to enter theunderground passage, it is safe and convenient.
Platform size |
1200mm(L) x 1200mm(W) |
|
Max Platform Height |
6000mm |
|
Speed |
60mm/s |
|
Load capacity |
150KG~350KG |
|
Operate voltage |
24V |
|
Power Output |
2.2KW |
|
Power Input |
220V/50HZ (or customized for local power supply) |
|
Drive System |
Hydraulic |
|
Control Mode |
Inching Switch or Automatic |
|
Drive Control |
Self-resetting system |
|
Overload |
Protection Over current relay |
|
Material of Platform |
Checkered slip-proof aluminum alloy |
|
Painting |
Plastic electrostatic spraying |
|
Working Condition |
Both indoors and outdoors |
|
Working temperature |
From -10°~60°C |
|
Installation
|
Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground) |
|
Control Device
|
Calling box (installed on the wall nearby) and remote controller(Extra optional) |
|
Emergency Stop
|
The lifting and lowering process can be stopped immediately by pressing the emergency button. |
|
Safety device |
Safety Interlock |
Lock the platform when it is out of control |
|
Emergency lowering |
The platform can be lowered by opening hydraulic valve manually or rolling screw rod. |
© 2017 skyliftcc. All rights reserved.