In modern homes, install a compact residential elevator is a popular choice. These are commonly referred as”Machine Room-Less Elevator / MRL Elevator”

Below is a recommended Skystair residential home elevator specifically designed for small spaces, for your consideration.

1. Minimum installation space: Approximately 31.5 inches x 39.4 inches;
2. Load capacity: Typically 660 lbs;
3. Installation Locations:

• Mid-staircase: The most common installation spot, requiring precise measurement of the clear space at the staircase turn.
• Wall-mounted corner: Utilizes a room corner or the end of a hallway.
• Existing shaft: For retrofitting older buildings, installation within a narrow existing shaft is possible. Professional measurement is needed.

Features:

Pit requirement: No pit required. No machine room. No enclosed brick shaft. 

Headroom requirement: ≥ 6.5 feet.

Advantages: Lower cost, simple installation/maintenance, smooth operation, extremely low noise ( 50 dB ).

Parameter Explanation:

• Minimum Installation Space: Space required to accommodate elevator components such as guide rails, brackets, and car. Equivalent to the reserved structural floor opening dimensions.

Example: For an elevator with a cabin interior of 29 inches x 26 inches, the required floor opening in your home should be at least 34.5 inches x 41.7 inches.

• Pit Depth: The depth required to excavate below ground level. Hydraulic driving elevators may not require a pit.
• Overhead space: The distance from the car top to the shaft top when the elevator stops at the highest floor. Must meet the minimum height specified by the elevator manufacturer to ensure safe maintenance space.

Typically requires ≥ 80 inches ( 2030mm ).

• Machine Room: Above type elevator is machine-room-less designs. Control cabinets can usually be installed beside the elevator or in nearby spaces (e.g., under stairs, storage rooms). Confirm the location with the supplier in advance.

• Power Source: Local AC electricity, such as 220v/240v, 50/60hz, single phase.  Max 14Amps current.
• Price Cost: Total costs range from $10,000 to $15,000, including the cost of unit and on-site installation.  
• Handyman benefits: This elevator is preassemble in factory and finished all function test, then break down into kitset.  You can make installation by yourself, to save lots of installation charges.   

Hope this information helps you build a perfect elevator!

Check How The Small Home Elevator works:

  Interested install an mini home elevator below $10k ? Contact us for a details quote!